Why TEBAK
Why TEBAK — Slideway Material Quality, Supply & Workshop Feedback
TEBAK is the slideway material brand of Hengshui Sanrenxing Trading Co., Ltd. — a factory in Hebei, China specialised in PTFE-based guideway soft tape, slideway liner and the adhesives and spotting paste used to fit them. This guide explains the TEBAK advantage across quality, workshop feedback and factory-direct supply, written for machine tool rebuilders, OEMs and maintenance teams sourcing a Turcite B replacement.
TEBAK in the machine tool slideway industry
The TEBAK brand supplies the slideway material family machine tool rebuilders ask for every day: PTFE-based soft tape for guideway relining, CNC slideway liner sheets and strips, two-part epoxy adhesive for bonding, and scraping spotting paste. Our factory in Hengshui, Hebei produces skived slideway tape as a direct alternative to branded materials such as Turcite B and Slydway, and ships cut-to-length pieces and full rolls to machine tool service shops, OEMs and distributors worldwide.
Quality — what rebuilders check first
Guideway liner quality is judged by the material, not the packaging. TEBAK liner is skived from a single PTFE-based compound to keep friction low and thickness consistent across the strip, then one side is chemically etched to give the epoxy a reliable bond to steel and cast iron ways.
| Quality point | What it means on the machine |
|---|---|
| Skived PTFE compound | Low friction and smooth low-speed motion — no stick-slip on CNC axes |
| Etched bonding side | Structural bond to steel or cast iron with two-part epoxy |
| Consistent thickness | Finished liner holds original centre height after machining |
| Standard size range | Widths 100 / 200 / 300 / 305 mm, thickness 0.8 – 3.2 mm |
| Colour-coded grades | Blue, Green, Brown and Brick Red for traceability on the floor |
Every roll is produced on the same line with the same compound, so a replacement order in the same colour, width and thickness behaves like the last one. That consistency is what keeps machines in service — see our Turcite B replacement guide for the full material comparison.
Performance in the workshop — customer feedback
The most useful feedback on a slideway material comes from the people who fit it, and the feedback machine tool rebuilders share with TEBAK repeats a few themes.
- Cutting and fitting behaviour — the skived tape trims cleanly and clamps flat without curling at the edges.
- Bonding reliability — the etched surface wets evenly with epoxy, and bonded strips hold through machining.
- Sizing accuracy — cut-to-length pieces arrive to the requested width, thickness and length, so workshop time is not spent re-trimming.
- Ease of specification — giving colour, width, thickness and length in one message is enough to receive an accurate quotation.
- Service support — dimension questions and machine-specific advice are answered within 24 hours by email or WhatsApp.
Because TEBAK is factory-direct, the people answering those questions are the people making the material — which shortens the loop between a workshop problem and a practical answer.
Factory-direct sales and delivery
- Factory-direct supply from Hengshui, Hebei, China — no trading middle layers on standard sizes.
- Cut-to-length service for sheets and strips; full rolls 5–20 m for production runs.
- OEM and non-standard sizes accepted against drawings or samples.
- Two-part epoxy adhesive and spotting paste supplied with the tape to complete the job.
- Quotations within 24 hours, with packing for export and delivery worldwide.
Where to start
Choose the liner colour and size from our product range — Blue, Green, Brown, Brick Red — with epoxy adhesive and spotting paste for the fitting stage. New to the material? Read the installation guide and the sizing guide first.